FU Archive 

Check here for past FU Segments.

FU's first lesson: Fin Definitions. We go over so simple definitions that could help you understand fins a little better. Watch for more classes. Follow us Facebook, Twitter, Instagram, and Pinterest.

FU Lesson: Area. We'll go over area of the fin and the Fin Template. There are two parts to the Area section. 

FU Lesson: Fin Area Part 2. This is the second part to Fin Area. We go over how Fin Area is determined.

FU: Fin Base Lesson goes over what makes the base of the fin and what it means to your surfing.

FU: Fin Depth Lesson goes over what makes the Depth of the fin and what it means to your surfing.

FU: Fin Sweep Lesson goes over what make the Sweep of the fin is. And what it means to the Fin and your Surfing.

FU:This Fin Lesson goes over Rake of the Fin. What it means to your Fin and Surfing.

FU: Flex is stiffness, what's it mean in Fins.

FU: Rules of Fins. Let's go over all the past lessons to make our rules for fin selection.

FU: Single Fin setup and what to expect from it.

FU: Going over the Twin Setup in this lesson. What you can expect from it. The advantages and disadvantages.

FU: Thruster are common fin setups, we'll go over their characteristics along with strengths and weakness.

FU: This FU Lesson on Quad Fin Setups. What to expect, strengths, and weakness.

This FU Lesson is about Choosing the Right Fin Size.

FU's next Chapter is Surfboard Bottoms. This lesson introduces us to the basic board bottoms.

FU: Flat Bottoms, what they are and how they effect your surfboard. 

FU: This FU lesson goes over Concave board bottoms. 

FU: Double Concave. We go over the Double Concave board bottom.

FU Lesson: Vee Bottoms, we go over what it is and its characteristics.

FU Lesson: Belly Bottoms, simliar to Vee. We'll discuss what it is and what its for.

FU: Intro to Surfboard Rocker, We'll go over basic definition and function of a board's rocker.

FU: Intro to Surfboard Rocker, We'll go over basic definition and function of a board's rocker.

FU: Rocker Breakdown the different type of rocker and how they affect the surfboards performance.

FU: What different rockers mean to boards and some general rules for surfboard rocker. 

FU: Going over the definition and function of surfboard Flow/Foil.

FU: Going over the definition and function of surfboard Flow/Foil.

FU: Breaking down the first 1/3 of the board and nose thickness.

FU: Breaking down the first 1/3 of the board and nose thickness.

FU: Middle Thickness, breaking down that thick part.

FU: We all like a thick tail right? This lesson goes over that back 1/3rd of the board.Middle Thickness, breaking down that thick part.

FU: Next Chapter is Width, this lesson starts off with an Introduction to surfboard width.

FU Lesson: Nose Width We dive into the width on the first third of your board. What it means to the board and your surfing. 

FU Lesson: Nose Width We dive into the width on the first third of your board. What it means to the board and your surfing. 

FU Lesson: Wide Point Location. Just as important as the width of the board is where it's widest at. We'll go over wide point location next. 

FU Lesson: Tail Width. Going over the back 1/3rd of the board. What the different types of tail width and what they mean to your board's design and performance. 

FU Lesson: Width; Wide Point. Looking at what the width of your surfboard is and its effects.

FU Lesson: Rails Introduction. Going over what the rail is, the two basic types, and the function.

FU Lesson: Rails Introduction. Going over what the rail is, the two basic types, and the function.

FU Lesson: Soft Rails
We go over the function, advantages and disadvantages of soft rails. 

​© 2023 by INDUSTRIAL DESIGN. Proudly created with Wix.com